About This fishing Q&A
Ask a question and receive answers from offshore and inshore fishing experts
What snap swivels would you use to attach to main?
Asked 6 ´months ago | Mini Soft Head 4" Flat Ballyhoo Pre-Rigged
What is the prefer average speed for trolling wahoo
Asked 4 ´years ago | High Speed Wahoo Trolling Lures > Wahoo Pre-rigged Trolling Lure Pack
Answer:
Trolling speeds for Wahoo vary greatly. From dead bait speeds of 5-7knts to high speed trolling of 12-24knts+. For this pack we recommend 10-16knts. If you want to increase the speed, we would suggest heavier trolling leads, in the 32-64oz range. You can find pre-rigged trolling weights here: https://www.fathomoffshore.com/produc...
whats the length of these hooks
Asked 2 ´years ago | OEM Skirt Customers > Stainless Trolling Lance Hooks - 5 Pack
Answer:
We have added sizing for all the hooks under the description including length, width (height) and gap dimensions. You can find sizing for all the stainless trolling lance hooks HERE.
what replacement skirts fit the medium lure
Asked 6 ´months ago | Fatboy Lead Bullet Trolling Lure
Asked 6 ´months ago | Ballyhoo Rig
Trolling gear recommendations?
Asked 1 ´year ago | Agitator Bars > Agitator 7" Bird Bar ECM Rigged
Answer:
The lure itself is approx 6" long (depending on how you lay the hair) and weighs 1oz.
What’s the best way to tie this to your main line?
Asked 4 ´years ago | Mini Soft Head Chuggers > Mini Soft Head 4" Chugger Ballyhoo Pre-Rigged
Answer:
The end of the mono leader has a small crimped loop that you can clip to your main line via a snap swivel.
Asked 5 ´months ago | Medium Roll Up Lure Bag (6 Pocket)
Should your weight color match your dredge color
Asked 6 ´months ago | Dredge Rigging > Black Holo Fleck Lead Fish Weight
Answer:
The SR20 squid is 7" in total length. This dredge is un-weighted in order to keep it as light as possible, however you would want to use a dredge weight to keep it sub surface.
Can lures be stored with the hooks attached ?
Asked 3 ´years ago | Small Roll Up Lure Bag (6 Pocket)
Answer:
Yes, you can store your lures with leader and hooksets attached. We simply recommend you pull the hook set from the hook lock when rinsing and make sure to remove all saltwater residue and hang to dry before storage.
Answer:
While we don't necessarily consider the Game Changer medium a high speed lure, we do know people who have fished it that way with success. We would generally defer you to our HIGH SPEED TROLLING section of the site for high speed specific tackle. We are often looking for lures that are slightly heavier than the Game Changer medium, but that's our own personal preference.
I just purchased 3 Tinker Mackeral. I did not see an option for replacement skirts. Can I get them?
Asked 4 ´years ago | Large Resin Trolling Lures > Tinker Mackerel Calico Jack Slant Large 14" Trolling Lure
Answer:
Yes, we do sell the Tinker Mackerel skirts on the site. The Calico Jack Slant takes an OC50 skirt size. The outer lure replacement skirt can be found CLICK HERE. The inner skirt is solid black and can be found CLICK HERE.
Answer:
All of our roll up trolling lure storage bags contain a clear PVC type window with a strong Velcro closure. We have found that Velcro holds up to the moisture and corrosion of saltwater well and offers a secure / durable means of closure.
How fast and where in my spread should I place this
Asked 1 ´year ago | Calico Jack Slant Medium 9" Trolling Lure
Answer:
This lure is very versatile, it can be run in a number of locations in our trolling spread. However, we generally run it in the long rigger position. The angled face allows for the lure to climb to the surface, push water, then return subsurface to expel a bubble trail. Lures with plunger style or angled face profiles need less line angle to create the intended action, making them great long rigger baits. It will perform equally as well in short rigger, but we leave that for lures that require more line angle. We are generally trolling our medium lure spreads in the 7-9knt range, that can vary based off ocean conditions and current.
Are the body's solid or hollow?
Asked 3 ´months ago | Reggae Body SR Squid
Answer:
To view all trolling lure replacement skirts, CLICK HERE. The SR71 XL is an OC50 and the MD is a OC27 size.
When will these be back in stock?
Asked 4 ´months ago | New Winter Apparel > Jolly Roger Camo Hoody
Best position for this lure? And also is this lure supposed to go with ballyhoo or without?
Asked 3 ´years ago | Large Resin Trolling Lures > Tinker Mackerel Calico Jack Slant Large 14" Trolling Lure
Answer:
Most of our trolling lures are intended to be trolled with no ballyhoo or dead bait unless specified. Each lure head shape offers a unique swimming motion and action when run naked (without bait). We offer a pre-rigged version of this lure that is rigged an ready to fish, simply clip to your mainline and go. The Calico Jack Slant Large is super flexible on where it can be run, however the nose angle allows it to run really well even with low line angle (long rigger etc.) but can be run closer as well.
Answer:
Absolutely! This chain and the BIRD HEAD CHAIN can both be run in front of a ballyhoo; or pther favorite lure. We often run a ballyhoo with a Mini Chugger or ballyhoo with Mini Skirt behind the ECM Chain.
Answer:
The weight of the large Torpedo trolling lure is 5oz, the medium lure is 3.7oz. See above chart for additional specs.
Does the weight stay centered on the cable?
Asked 2 ´months ago | Pre-Rigged High Speed Trolling Lead
What Size weight would you recommend?
Asked 11 ´months ago | Double Tier Black Flapjack SR Squid Combo 24" + 12" Dredge
Answer:
Typically with a dredge of this size we would recommend at-least an 8lbs fish weight, however depending on sea conditions and trolling speed, a 10lbs may be preferred.
What is the best position for the Pepal Grande?
Asked 2 ´years ago | Large Resin Trolling Lures > Pepal Grande Large 14" Trolling Lure
Answer:
The Pepal Grande can be run in a variety of positions. However, we feel this lure runs best in the short position due to the increased line angle. We generally run it left short.
WHERE DO YOU RUN THIS IN THE SPREAD
Asked 1 ´year ago | El Nino Loco Small 7" Trolling Lure
Is the purple and pink agitator bar actually pink
Asked 4 ´years ago | Agitator Bars > Agitator 5" Bird Bar Rigged
Answer:
The bird is more purple and the mini skirt duster is both, Pink head, pink and purple mylar hair. 
Do you have in 10/0? Shank length if you do? thx
Asked 4 ´years ago | Stainless Long Shank Ballyhoo Hooks - 10 Pack
Answer:
This specific hook is primarily used for dead bait rigging and ballyhoo. Sizing stops at size 9/0. However we do offer a trolling lure hook called the Trolling Lance in sizes 7/0 - 10/0 designed specifically for offshore trolling lures. CLICK HERE to view the entire line.
What mm would the 270lb ss cable equate to
Asked 4 ´years ago | OEM Skirt Customers > Stainless Steel Cable
Answer:
The Actual OD dimensions of the stainless steel cable are as follows:1.23mm - 270# Cable
1.63mm - 480# Cable
2.5mm - 920# Cable
i have some 16" lures with a neck size of 2 1/8 inches.do you have a size skirt to fit them?
Asked 4 ´years ago | OEM Skirt Customers > OC Trolling Lure Skirt Color #35
Answer:
When you are referring to the neck of the trolling lure, are you talking about the back diameter of the head itself or the skirt saddle. We have a lure skirt sizing guide you can access by CLICKING HERE. If you need additional help, please call 910-399-6882 and we can walk through it.
What position is best for this lure in Large size? Thanks!
Asked 1 ´year ago | Mo Head Chugger Large 14" Trolling Lure
Answer:
We typically run the Mo Head Chugger Large in the short rigger position. This will allow the trolling lure the correct amount of line angle for optimum performance. With an aggressive concave nose, this lure will hold air longer, creating a more dramatic bubble trail, then returning to the surface to breathe.
Answer:
We recommend fishing this trolling lure in the short rigger position. The concave face requires some line angle to keep the lure re-surfacing every few seconds as opposed to a slant face lure which can be run further back. If you don't have outriggers, simply run this lure straight to the rod tip in your spread and don't pin it down like a flat line.
New to outrigger fishing what would you start with as beginner ?
Asked 1 ´year ago | Deep Purple Pre-Rigged Vivid Squid Chain
Answer:
This is a great question. To people looking to get into lure fishing (with or without outriggers) we suggest going with a pre-rigged pack. Our complete trolling lure packs come fully rigged, ready to fish, and include a recommended spread chart. While every boat and situation varies slightly, whether you are trolling for Mahi, Tuna, Wahoo or Blue Marlin, the concepts are still the same. We offer pre-rigged trolling lure packs for all types of species and applications from high speed Wahoo fishing and beyond. The addition of outriggers to the boat allow you to increase the width of the spread, and start to incorporate teasers such as squid chains etc. As always, feel free to give us a call and we can build a spread tailored to your specific needs and requirements. 910-399-6882.
Answer:
The length of the mini skirt is approx 3.5" when the hair is laid back as it would swim. 7.5" in diameter when sitting flat on a table. Currently this is the only size we offer, but a larger size is a great idea and I will pass it along to the team for review.
does this lure have a lead insert in the head ?
Asked 3 ´years ago | Agitator Bars > Epic ECM Squid (5-Pack)
Answer:
The ECM or (epic) squids do not have lead inside the head. They are hollow skirts similar to a bulb squid. A lot of customers do put lead egg sinkers in the heads when making lures etc.
what size snap swivel is used for the stinger, the one I looked at looks like it is for fluke not suitable for tuna
Asked 3 ´years ago | Bird Head Chain
Answer:
Our Fathom Offshore bird chains are rigged on 150# mono with a 120# stainless steel tournament style snap swivel inside the back of the last bird. These snap swivels are super durable and high quality.
what is the lenght of a 2 lb weight?
Asked 10 ´months ago | Glow Collection > Coated Deep Drop Stick Weights Glow
Answer:
The length on the 2lbs stick weight is 3.75" from top of the brass ring to the base of the weight.
Do you want to keep the same or similar color scheme of the attached lure as the agitator bar?
Asked 4 ´years ago | Agitator Bars > Agitator 5" Bird Bar Rigged
Answer:
That's a great question, and if you ask 100 different Captains you may get 99 different answers. Its a personal preference. Typically we would run a similar color, as to make it appear as if it simply fell behind the school. However, some also suggest running a different color makes the trailer stand out, and is more likely to get hit. Or, appearing as if the school is being chased, eliciting a feeding response. We've had good success with both on the agitator bar.
attach bait to the hooks or pull as is?
Asked 4 ´years ago | High Speed Wahoo Trolling Lures > Wahoo Pre-rigged Trolling Lure Pack
Answer:
Most of our pre-rigged trolling lure packs are designed to be pulled as-is with no bait. All of our trolling lures are tuned and engineered to give you the best performance as a stand alone lure. The Wahoo Allstar pack does include 2 Jimmy Rig lures that are cable rigged for Ballyhoo, but this Wahoo High speed pack is intended to be run as is.
What size is the hole to insert a wire pre-rigged ballyhoo
Asked 4 ´years ago | El Nino Loco Small 7" Trolling Lure
Answer:
Great question!! The through hole is 3/16" but with the chafe tube, it brings the actual through hole dimension to just under an 1/8". While you can put ballyhoo behind this lure, they are designed and intended to be run as is with no bait. The swimming action is designed to be run with a hook set only and we recommend 150lbs mono leader. We do offer a number of products specifically for dead bait and ballyhoo that can be found here. https://www.fathomoffshore.com/collec...
What size rods does this have?
Asked 10 ´months ago | Double Tier "No Tangle" SR30 Reggae 12"+12" Dredge
Answer:
These dredges are built on the Strike Point .125" stainless dredge frame.
How do the lance differ from the regular long-shank trolling hooks?
Asked 5 ´months ago | OEM Skirt Customers > Stainless Trolling Lance Hooks - 5 Pack
Answer:
The Fathom Trolling Lance hook has a larger profile and a thicker wire gauge used for all types of trolling lures / hooksets where you are not using bait (however, this has become a favorite hook for swordfish rigging due to its strong thick wire). The long shank ballyhoo hooks are overall smaller and used for rigging ballyhoo. The thin wire of the Ballyhoo hook allows for easier rigging of bait without the damage that would be caused by a larger wire gauge. See attached image of a 9/0 Trolling Lance with a 9/0 Long Shank Ballyhoo Hook.
