Is this lure supposed to go with bait or without it?
Asked 3 ´years ago | Game Changer Medium 10" Trolling Lure
Answer:
Most of our trolling lures are intended to be trolled with no ballyhoo or dead bait unless specified. Each lure head shape offers a unique swimming motion and action when run naked (without bait). We offer a pre-rigged version of this lure that is rigged an ready to fish, simply clip to your mainline and go.
How much weight do you recommend to keep this down in water
Asked 3 ´years ago | Single Tier SR20 Green Silver fleck 32" Dredge
Answer:
The answer depends on conditions and trolling speed, however a 4-6lbs (6lb being most common) coated dredge fish is the most popular choice for this dredge. If you are trolling faster or conditions are rough, it may require additional weight.
Do you use the shrink tube on connections on mono leaders?
Asked 9 ´months ago | OEM Skirt Customers > Adhesive Lined Shrink Tube
Answer:
We do NOT recommend heat shrinking mono connections. Generally speaking, the heat shrink is to cover the cable tag end that can be sharp and abrasive, and or to cover and seal cable connections. We do however recommend chafe protection on mono leaders, as well as burning the tag end.
Answer:
The SR squids do not have an exterior channel, however they do have a hollow interior that allows for rigging. They are often rigged individually for trolling / green stick baits.
Answer:
Yes, the Same Ole Roll Medium trolling lure has a flat face. This lure face profile allows for a consistent and methodical chugging action that works well on calm and rough days.
Answer:
Our Torpedo lanterns are currently only offered in a double hook configuration, however we can easily make them in a single hookset if you prefer. Simply call us at 910-399-6882 or e-mail: Info@fathomoffshore.com and we will be happy to get your build underway.
Do these come in a storage tube?
Asked 8 ´months ago | OEM Skirt Customers > Adhesive Lined Shrink Tube
Answer:
They do. All our chafe tube, shrink tube and hook locks come packaged in a resealable plastic storage tube.
At what speed would you recommend to troll this for blackfin tunas?
Asked 7 ´months ago | Agitator Bars > Agitator 5" Bird Bar ECM Rigged
Answer:
The agitator bar does really well in the 5-9knts range. Perfect for trolling dead bait and artificials / lures for Blackfin.
Can this be rigged with mono or flouro instead of cable?
Asked 3 ´years ago | Jimmy Rig - Cable Ballyhoo Rigged Torpedo
Answer:
Absolutely it can be rigged with either mono or fluorocarbon. We sell the mono rigged Ballyhoo rigs here: https://www.fathomoffshore.com/produc...
Is the color silver or white?
Asked 7 ´months ago | Saltwater Fishing Headwear | Hats > Halcyon Performance Cap Silver
Answer:
The Halcyon cap in Silver is a light Silver. It is NOT white.
Do all of the squids on the bar come pre rigged with hooks?
Asked 3 ´years ago | 36" STI-229 Squid Spreader Bar
Answer:
No, none of the squids on the STI spreader bar have hooks. They act as an attractant / teaser. The last squid contains a snap swivel for you to attach your favorite trolling lure or dead bait rig. Here is a great video explaining the overall basics or spreader bars. https://youtu.be/_os5rNltzIs
When trolling either the medium or the x-large lure, do I need to add a trolling weight?
Asked 7 ´months ago | SR71 Stainless High Speed Trolling Lure
Answer:
No, you don't have to add a trolling weight with the SR71 for trolling, even at moderate to high speeds. However, there are several variables here: the faster you go, or closer you run the lure, you may want to. As long as the lure isn't skipping or launching out of the water, you are fine.
Answer:
While this pack contains several different types of lures (the individual items are broken down in the description, see that for details) we would classify this pack in the medium size class (7"-9" range)
Do you have a replacement skirt for this? The BFT Special Mo head.
Asked 7 ´months ago | Large Resin Trolling Lures > TBF Special Edition Mo Head LG 14" Trolling Lure
Answer:
We do sell replacement skirts. The Mo Head Chugger Large trolling lure takes an OC60 skirt size. The outer for the The Billfish Foundation color-way is OC60-12 and the inner skirt is OC60-24.
Are they small or medium?
Asked 3 ´years ago | New Advancements > Custom Color Pre-Rigged Trolling Lure 2 Pack
Answer:
The two trolling lures included in this pack are small. Approx 7" in length.
Is this intended to run alone or can you add a ballyhoo?
Asked 1 ´year ago | El Nino Half Pint Extra Small 6" Trolling Lure
Answer:
All of our resin trolling lures are intended to be pulled as is, without bait. However, we do know people who put bait behind them and have success. All our trolling lures are designed and engineered to swim correctly and give the appropriate action without the addition of any dead bait. We do have an entire section of lures and rigs for ballyhoo and other dead bait HERE.
What’s the recommended weight if I’ll be trolling 7-9 knts?
Asked 3 ´years ago | Dredge Rigging > Black Holo Fleck Lead Fish Weight
Answer:
The weight really depends on a few different factors including the overall size of the dredge. However, our most popular weight is 8lbs. If your looking to get a standard size dredge down at 7knts or so, 8lbs fish weight should be sufficient. The faster you go, the bigger the dredge, the more weight you need.
what size replacement skirts are used on the medium size SR71.
Asked 7 ´months ago | SR71 Stainless High Speed Trolling Lure
Answer:
The SR71 Medium takes a OC27 size, while the extra-large is a OC50. The skirts are hand tied (not glued) so replacement is easy. To view all replacement trolling lure skirts colors, click HERE.
I have had big blue marlin sail by all lures and natural baits only to zero-in on my hot pink lure. Good going guys
Asked 3 ´years ago | Large Resin Trolling Lures > Jungle Bug Large 14" Trolling Lure
Answer:
We love to hear this! We glad to hear the Jungle Bug is producing for you as well. Thanks again.
Can this be used when high speed trolling?
Asked 3 ´years ago | Agitator Bars > Agitator 5" Bird Bar Rigged
Answer:
Due to its light weight and action, we do NOT recommend the agitator bar for high speeding. If you're looking for a high speed alternative, we would recommend our WAHOO CHAIN. It still gives a similar squid chain like appearance, but designed to be trolled at higher speeds.
What is the recommended heat source to shrink the tubing.
Asked 1 ´year ago | OEM Skirt Customers > Adhesive Lined Shrink Tube
Answer:
We use a standard heat gun found at your local hardware store, and it only takes a second or two of applied heat to reduce down. You can use a torch, but you need to be careful not to burn the tubing and do not touch the flame to the shrink tube.
Where is the best spot to pull this game changer when trolling
Asked 2 ´years ago | Blackfin Tuna Game Changer Medium 10" Trolling Lure
Answer:
Due to the concave face, we like to pull the Game Changer trolling lure (any size) in the short position. The line angle of a short rigger creates the perfect action for this lure head shape.
Answer:
As a standard our double hookset is considered 180° (front hook up, back hook down) however, we are able to rig these in 0° configuration (both hooks facing the same way.) Simple place your order, then call 910-399-6882 or e-mail info@fathomoffshore.com with your order number and request the change, we will handle it.
Answer:
We do offer circle hook rigs for dink bait fishing or pitch baiting with ballyhoo or Spanish mackerel. You can find them HERE.
Answer:
We recommend running the mistress in a long position. The aggressive slant face will force the lure to the surface to swim, this could cause it to skip or skitter in the short position or with high line angle.
Did you sell the pre rigged weighted daisy chain?
Asked 1 ´year ago | High Speed Wahoo Trolling Lures > Pre-Rigged Wahoo Chain
Answer:
If you are referring to the chain only section without the lure, we can sell it that way by calling 910-399-6882. However the rigged trolling lure is removable via the snap swivel inside the last squid if you are wanting to change it out.
how are you rigging ballyhoo on a double hookset rig?
Asked 1 ´year ago | Pre-Rigged Torpedo Lantern
Answer:
Our Torpedo Lanterns are intended to be pulled as is without bait or ballyhoo. The Lanterns contain two skirts, with two lead egg sinkers contained within. Rigged on 4' of stainless cable leader with a stainless double hookset. We do sell our pre-rigged torpedo Jimmy rigs, this is cable rigged ballyhoo setup for Wahoo.
Is it possible to get just the heads? And does the head alone weigh 8.oz?
Asked 2 ´years ago | Large Resin Trolling Lures > Double O Large 14" Trolling Lure
Answer:
We don't offer head only on the website, however we can sell the un-skirted lure head by calling 910-399-6882. We can also skirt the lure with specific skirt colors if you would like. The weight listed as "skirted weight" includes skirts, the head only weight for the Double O large is 5.3oz.
Answer:
We generally don't put any weight in front of this lure. We pull it on the surface in the short rigger location. The jets expel a bubble trail quickly due to the increase dispersion of air, then the lure will resurface and immediately begin to expel again. If you're looking for a higher speed lure you can run subsurface with a weight in this size class, we recommend the Fatboy.
are these for albacore tuna
Asked 1 ´year ago | Squid Chains and Dredges > Deep Purple Pre-Rigged SR Squid Chain
Answer:
Squid chains can be used as a teaser for a variety of species, including Tuna. If you are looking for rigged baits, and will be specifically targeting smaller to mid size tuna such as Albacore, Blackfin or Bonita, check out our Mini Skirt Chain.
What is the difference between the chugged and the flat?
Asked 2 ´years ago | Mini Soft Head 4" Flat Ballyhoo Pre-Rigged
Answer:
The chugger has a concave face, allowing the lure to pop and chug slightly more than the flat face.
Answer:
The Fatboy trolling lure can be pulled up to +20knts with the help of a trolling lead and shock leader. However, without additional weight 10-12knts is max trolling speed depending on how far back the lure is.
Is this for just one jig head or a pack of multiples?
Asked 1 ´year ago | Inshore Fishing Lures & Tackle > Bug Eye Jig Heads
Answer:
1/8oz through 3/8oz are 4 packs, the 1/2 is a 3 pack.
What is the overall length of these? Thank you!
Asked 2 ´years ago | Torpedo Lures > Torpedo Mini Bullet Trolling Lure
Answer:
The length is approx 6"-7"
does is come with a bag or is a bag available?
Asked 2 ´years ago | Single Tier SR20 Solid Black 32" Dredge
Answer:
The single tier chandelier style dredges do not come with a bag in order to keep the cost as low as possible for our customers. We do offer a dredge storage bag for those that would like one, it can be found HERE.
Is the Torpedo Lantern intended to go with dead bait or without it?
Asked 3 ´years ago | Pre-Rigged Torpedo Lantern
Answer:
Our Torpedo lanterns are designed to be pulled as is with no bait. They include two egg sinkers hidden within two skirts and a cable rigged stainless steel double hookset. However, the torpedo itself can be rigged a ton of different ways, many include dead bait. We offer the Torpedo (Jimmy Rig) which is rigged on a cable ballyhoo rig that's perfect for Wahoo. We also sell the Torpedo individually so you can rig it to your preference.
Can you use copper with these mini chuggers instead of springs?
Asked 3 ´years ago | Mini Soft Head 4" Flat
Answer:
Absolutely you can. These Mini Soft Heads can be rigged a ton of different ways. From circle hooks to copper wire or spring rigs, there are countless rigging options. To see this lure rigged on wire as you described, you can watch our tutorial on YouTube HERE
Can you make these with a free swinging back hook?
Asked 3 ´years ago | Fathom Trolling Lance Stainless Double Hookset
Answer:
We see hook-sets rigged a ton of different ways. Currently we only offer our Trolling Lance stainless steel hook-sets as shown here, as a semi stiff rig.
Does the Agitator bar come with a storage bag? If not which one will I need?
Asked 3 ´years ago | Agitator Bars > Agitator 7" Bird Bar ECM Rigged
Answer:
The Agitator bars do not come with a bag in order to keep the cost to our customers as low as possible. We do sell a small dredge bag for those who are looking for a storage solution. This bag is perfect for both the 5" and 7" Agitator bird bars. You can find that SMALL DREDGE BAG here.
10.2 oz is this the base weight or is it with the total rigbase weight for this
Asked 2 ´years ago | Large Resin Trolling Lures > Tinker Mackerel Calico Jack Slant Large 14" Trolling Lure
Answer:
10.2oz is the skirted weight only. So that includes trolling lure head, two skirts and hook lock. There is no rigging (hookset or leader) included in that weight.
Can I get a 14lb weight? Or 15lb?
Asked 3 ´years ago | Glow Collection > Coated Deep Drop Stick Weights Glow
Answer:
Currently we do not offer 14lbs or 15lbs deep drop stick weights. The largest we currently produce is 12lbs.
How do you rig a flap with egg sinker and chugger head?
Asked 3 ´years ago | Dredge Rigging > Blue | Silver Flapjack #616
Answer:
This sounds like a great topic for an upcoming rigging video, thanks for the idea. However, a simple way to accomplish this is to make a mono loop end through the nose grommet, crimp, add egg sinker, then add your mini chugger of choice. We generally add 3-4 feet of mono then add another loop end to connect to your teaser line or back of a squid chain. Stay tuned for the video tutorial. We do sell this in a completed chain HERE.
Answer:
Tail grommets are an additional grommet in the tail of the flap (same grommet that's in the nose). This is often used when rigging chains or multiple flaps in line with one another.
Answer:
While we don't generally sell 600# stainless cable, we do offer it special order in the same 30' lengths with crimps. This can be purchased directly via phone or e-mail order. If you would like to order, please e-mail us directly at info@fathomoffshore.com
where do you get replacement skirts?
Asked 2 ´years ago | 2XL Marlin Teasers > Calico Jack Slant 2XL 19" Teaser
Answer:
We make the replacements for these teasers in our North Carolina facility. Currently they are not listed on the website at the moment. Send an e-mail to info@fathomoffshore.com and we can get you taken care of.
Average dredge weight needed for the 3 tier?
Asked 3 ´years ago | Triple Tier "No Tangle" SR30 Pink Silver fleck 36"+ 24"+12" Dredge
Answer:
The weight needed for a dredge has several variables including speed and distance back in the spread. However, as a general rule, we recommend at least an 8lb lead fish weight for the triple tier dredges.
is this the same kind of stretch and fit as the Lagoon and Inlet shorts?
Asked 3 ´years ago | Tourney Hybrid Boardshort
Answer:
The tourney fishing hybrid short does not have the same Ultra-flex waist band as the Lagoon and Inlet. It is however a semi-flexible board short fabric.
Can make a fat boy with orange head with orange skirt over hot pink skirt use mako shark fishing
Asked 2 ´years ago | Fatboy Lead Medium 9" Trolling Lure
Answer:
We can do custom skirt colors by phone order. If you would like to swap a skirt color, we will do everything in our power to accommodate your requests. Simply call 910-399-6882 and let us know what you are looking for.
