Answer:
To view all trolling lure replacement skirts, CLICK HERE. The SR71 XL is an OC50 and the MD is a OC27 size.
When trolling either the medium or the x-large lure, do I need to add a trolling weight?
Asked 7 ´months ago | SR71 Stainless High Speed Trolling Lure
Answer:
No, you don't have to add a trolling weight with the SR71 for trolling, even at moderate to high speeds. However, there are several variables here: the faster you go, or closer you run the lure, you may want to. As long as the lure isn't skipping or launching out of the water, you are fine.
Is the color silver or white?
Asked 7 ´months ago | Saltwater Fishing Headwear | Hats > Halcyon Performance Cap Silver
Answer:
The Halcyon cap in Silver is a light Silver. It is NOT white.
At what speed would you recommend to troll this for blackfin tunas?
Asked 7 ´months ago | Agitator Bars > Agitator 5" Bird Bar ECM Rigged
Answer:
The agitator bar does really well in the 5-9knts range. Perfect for trolling dead bait and artificials / lures for Blackfin.
Do these come in a storage tube?
Asked 8 ´months ago | OEM Skirt Customers > Adhesive Lined Shrink Tube
Answer:
They do. All our chafe tube, shrink tube and hook locks come packaged in a resealable plastic storage tube.
Answer:
The lure itself is approx 6" long (depending on how you lay the hair) and weighs 1oz.
Do you use the shrink tube on connections on mono leaders?
Asked 9 ´months ago | OEM Skirt Customers > Adhesive Lined Shrink Tube
Answer:
We do NOT recommend heat shrinking mono connections. Generally speaking, the heat shrink is to cover the cable tag end that can be sharp and abrasive, and or to cover and seal cable connections. We do however recommend chafe protection on mono leaders, as well as burning the tag end.
Answer:
Correct, the hook is a MUSTAD 39951NP, Non offset 1X Ultra Point.
Answer:
This particular circle hook rig is the 1X Fine, MUSTAD 39951NP Non-offset Ultra Point. We do offer larger 2X and 3X pitch bait rigs for Marlin.
What size rods does this have?
Asked 10 ´months ago | Double Tier "No Tangle" SR30 Reggae 12"+12" Dredge
Answer:
These dredges are built on the Strike Point .125" stainless dredge frame.
what is the lenght of a 2 lb weight?
Asked 10 ´months ago | Glow Collection > Coated Deep Drop Stick Weights Glow
Answer:
The length on the 2lbs stick weight is 3.75" from top of the brass ring to the base of the weight.
What Size weight would you recommend?
Asked 11 ´months ago | Double Tier Black Flapjack SR Squid Combo 24" + 12" Dredge
Answer:
Typically with a dredge of this size we would recommend at-least an 8lbs fish weight, however depending on sea conditions and trolling speed, a 10lbs may be preferred.
Is this for just one jig head or a pack of multiples?
Asked 1 ´year ago | Inshore Fishing Lures & Tackle > Bug Eye Jig Heads
Answer:
1/8oz through 3/8oz are 4 packs, the 1/2 is a 3 pack.
WHERE DO YOU RUN THIS IN THE SPREAD
Asked 1 ´year ago | El Nino Loco Small 7" Trolling Lure
what coating is used on the weights? is it a hard material and does it protect the boat from marks and chips?
Asked 1 ´year ago | FAQ
Answer:
The coating used on our Dredge fish weights and our deep drop stick weights is the same material as our trolling lure replacement skirts. Its a proprietary formula we have developed over 35 years in manufacturing offshore fishing soft plastics. The material is semi-soft to the touch but extremely durable. The process of coating the weights is to prevent / minimize damage to the gel coat / finish of the boat when dropped or swinging. The coating also stops the weight from sliding around on wet surfaces during rough sea's. We believe our coating to be superior to alternatives on the market with enhanced durability and color retention.
Trolling gear recommendations?
Asked 1 ´year ago | Agitator Bars > Agitator 7" Bird Bar ECM Rigged
are these for albacore tuna
Asked 1 ´year ago | Squid Chains and Dredges > Deep Purple Pre-Rigged SR Squid Chain
Answer:
Squid chains can be used as a teaser for a variety of species, including Tuna. If you are looking for rigged baits, and will be specifically targeting smaller to mid size tuna such as Albacore, Blackfin or Bonita, check out our Mini Skirt Chain.
What position is best for this lure in Large size? Thanks!
Asked 1 ´year ago | Mo Head Chugger Large 14" Trolling Lure
Answer:
We typically run the Mo Head Chugger Large in the short rigger position. This will allow the trolling lure the correct amount of line angle for optimum performance. With an aggressive concave nose, this lure will hold air longer, creating a more dramatic bubble trail, then returning to the surface to breathe.
Answer:
All of our roll up trolling lure storage bags contain a clear PVC type window with a strong Velcro closure. We have found that Velcro holds up to the moisture and corrosion of saltwater well and offers a secure / durable means of closure.
Did you sell the pre rigged weighted daisy chain?
Asked 1 ´year ago | High Speed Wahoo Trolling Lures > Pre-Rigged Wahoo Chain
Answer:
If you are referring to the chain only section without the lure, we can sell it that way by calling 910-399-6882. However the rigged trolling lure is removable via the snap swivel inside the last squid if you are wanting to change it out.
New to outrigger fishing what would you start with as beginner ?
Asked 1 ´year ago | Deep Purple Pre-Rigged Vivid Squid Chain
Answer:
This is a great question. To people looking to get into lure fishing (with or without outriggers) we suggest going with a pre-rigged pack. Our complete trolling lure packs come fully rigged, ready to fish, and include a recommended spread chart. While every boat and situation varies slightly, whether you are trolling for Mahi, Tuna, Wahoo or Blue Marlin, the concepts are still the same. We offer pre-rigged trolling lure packs for all types of species and applications from high speed Wahoo fishing and beyond. The addition of outriggers to the boat allow you to increase the width of the spread, and start to incorporate teasers such as squid chains etc. As always, feel free to give us a call and we can build a spread tailored to your specific needs and requirements. 910-399-6882.
Answer:
We do offer circle hook rigs for dink bait fishing or pitch baiting with ballyhoo or Spanish mackerel. You can find them HERE.
Answer:
As a standard our double hookset is considered 180° (front hook up, back hook down) however, we are able to rig these in 0° configuration (both hooks facing the same way.) Simple place your order, then call 910-399-6882 or e-mail info@fathomoffshore.com with your order number and request the change, we will handle it.
What is the recommended heat source to shrink the tubing.
Asked 1 ´year ago | OEM Skirt Customers > Adhesive Lined Shrink Tube
Answer:
We use a standard heat gun found at your local hardware store, and it only takes a second or two of applied heat to reduce down. You can use a torch, but you need to be careful not to burn the tubing and do not touch the flame to the shrink tube.
Does the cable rigged one have the hooks facing the same way or 180 degrees?
Asked 1 ´year ago | Double O Medium 9" Trolling Lure
Answer:
As a standard our Double O cable rigged version features a 180° (front hook up, back hook down) stainless double hookset. however, we are able to rig these in 0° configuration (both hooks facing the same way.) Simple place your order, then call 910-399-6882 or e-mail info@fathomoffshore.com with your order number and request the change, we will handle it.
How fast and where in my spread should I place this
Asked 1 ´year ago | Calico Jack Slant Medium 9" Trolling Lure
Answer:
This lure is very versatile, it can be run in a number of locations in our trolling spread. However, we generally run it in the long rigger position. The angled face allows for the lure to climb to the surface, push water, then return subsurface to expel a bubble trail. Lures with plunger style or angled face profiles need less line angle to create the intended action, making them great long rigger baits. It will perform equally as well in short rigger, but we leave that for lures that require more line angle. We are generally trolling our medium lure spreads in the 7-9knt range, that can vary based off ocean conditions and current.
how are you rigging ballyhoo on a double hookset rig?
Asked 1 ´year ago | Pre-Rigged Torpedo Lantern
Answer:
Our Torpedo Lanterns are intended to be pulled as is without bait or ballyhoo. The Lanterns contain two skirts, with two lead egg sinkers contained within. Rigged on 4' of stainless cable leader with a stainless double hookset. We do sell our pre-rigged torpedo Jimmy rigs, this is cable rigged ballyhoo setup for Wahoo.
Answer:
We generally don't put any weight in front of this lure. We pull it on the surface in the short rigger location. The jets expel a bubble trail quickly due to the increase dispersion of air, then the lure will resurface and immediately begin to expel again. If you're looking for a higher speed lure you can run subsurface with a weight in this size class, we recommend the Fatboy.
Best way to run this?
Asked 1 ´year ago | Squid Chains and Dredges > Laser Blue Squid Flap Teaser Chain
Answer:
The flap teaser chain is fully rigged and ready to fish. We are pulling this from our teaser reels the same way we would pull a squid teaser chain. If you do not have teaser reels, you can run this as a teaser from your outriggers straight to a rod, but you will want to be able to quickly take the chain from a teased fish in order to either pitch it a bait, or present a hooked lure to eat. This is a teaser only, and a really effective one at that!
Is this intended to run alone or can you add a ballyhoo?
Asked 1 ´year ago | El Nino Half Pint Extra Small 6" Trolling Lure
Answer:
All of our resin trolling lures are intended to be pulled as is, without bait. However, we do know people who put bait behind them and have success. All our trolling lures are designed and engineered to swim correctly and give the appropriate action without the addition of any dead bait. We do have an entire section of lures and rigs for ballyhoo and other dead bait HERE.
will this handle bluefin? specificly like 40-60 inch ones if anyone has any experience with them on bigeye
Asked 1 ´year ago | Agitator Bars > Agitator 5" Bird Bar Rigged
Answer:
Our 5" agitator bars are rigged on 150# mono and should be sufficient for medium sized tuna. However, we do offer the 7" version that is rigged on 12' of 250# mono with upgraded swivels and terminal for larger more aggressive fish.
If this is fishing on a flat line would you clip it?
Asked 2 ´years ago | Pre-rigged Epic ECM Squid Chain
Answer:
If you're running the ECM Chain from the flat line position, we would recommend going straight to the rod tip without "pinning" it down. This allows a bit of line angle that will give the squids a "skittering" action and appear to be fleeing. Its ok if the front 1 (maybe 2) squid skip on the surface, but make the sure the lure is giving you a consist ant methodical 3-4 second chug behind the last squid.
Answer:
Standard our squid chains are rigged on 150# and 250# mono, however, if you have a specific request we can usually accommodate it. In this case, YES, we can rig a squid chain on 400# mono. Simply place an order and contact us at 910-399-6882 or info@fathomoffshore.com with your order number, and we can make the adjustment.
Do you rig it for ballyhoo
Asked 2 ´years ago | Mo Head Chuggers > Mo Head Chugger Half Pint Extra Small 6" Trolling Lure
Answer:
Generally all of our resin style trolling lures are intended to be pulled as is (with NO bait needed.) they are designed with a specific swimming action in mind. When you purchase this lure pre-rigged, it comes with everything needed to fish it out of the box. However, we do have an entire section of lures and baits for dead bait and ballyhoo. Shop the DEAD BAIT collection HERE.
whats the length of these hooks
Asked 2 ´years ago | OEM Skirt Customers > Stainless Trolling Lance Hooks - 5 Pack
Answer:
We have added sizing for all the hooks under the description including length, width (height) and gap dimensions. You can find sizing for all the stainless trolling lance hooks HERE.
what hook set up do you recommend to rig this with?
Asked 2 ´years ago | Glow Pink Splatter Pre-Rigged Vivid Squid Chain
Answer:
Most often the vivid squid chain is trolled as a teaser with some type of trailing lure, flap or dead bait (Spanish Mackerel.) However you could put a rigged bait behind this chain of your choosing and fish from a rod as opposed to a teaser reel. We do have people who rig the individual Vivid squids with an egg sinker and cable hookset to troll individually as a lure or green stick bait.
Answer:
The popping cork itself measures 3" in length by 1.16" in width at its widest point. The titanium wire is 7" in length, then add approx .5" for each swivel. This would make the total length of the rig approx 8".
What are the dimensions of the 6 lb weight?
Asked 2 ´years ago | Dredge Rigging > Blue | Silver Lead Fish Weight
Answer:
The 6lbs dredge fish weight is approx 7.5" long from nose to tail, add .5" for the rear brass ring, bringing the total length to 8".Width is approx 3.25" from peck wing to wing.
Answer:
Yes, our release knife features two razor sharp stainless steel blades that overlap. This design allows for easy cutting of large heavy duty mono leader, including momoi x-tra hard.
Answer:
While this pack contains several different types of lures (the individual items are broken down in the description, see that for details) we would classify this pack in the medium size class (7"-9" range)
Diameter of the lure head
Asked 2 ´years ago | 2XL Marlin Teasers > Calico Jack Slant 2XL 19" Teaser
Answer:
The diameter of this teaser is 2.61" in width. 4.8" in head length. We often refer to it as about the same size as a can of soda for quick reference.
Can these be rigged to meet igfa refs.? (Hook inside skirt)
Asked 2 ´years ago | Blue Marlin Pre-rigged Trolling Lures 6 Pack
Answer:
Specifically speaking to the hook placement in the skirt. IGFA rule states that the skirt must cover the eye of the hook. In their words: "The trailing hook may not extend more than a hook's length beyond the skirt of the lure." To this point, all of our resin head trolling lures are rigged to meet this spec.
Can make a fat boy with orange head with orange skirt over hot pink skirt use mako shark fishing
Asked 2 ´years ago | Fatboy Lead Medium 9" Trolling Lure
Answer:
We can do custom skirt colors by phone order. If you would like to swap a skirt color, we will do everything in our power to accommodate your requests. Simply call 910-399-6882 and let us know what you are looking for.
where do you get replacement skirts?
Asked 2 ´years ago | 2XL Marlin Teasers > Calico Jack Slant 2XL 19" Teaser
Answer:
We make the replacements for these teasers in our North Carolina facility. Currently they are not listed on the website at the moment. Send an e-mail to info@fathomoffshore.com and we can get you taken care of.
